How can scented candles be beautiful?

First burn is very important

Want beautiful burning scented candle, burn the first time,

you must see to it that the surface layer of the candle wax completely melted to form a flat pool after out (remember),

it can maximize the lower memory hole! Because the candle is a memory,

if not for the first time according to the above method to burn, burn to be out of place,

every time after the wax will remember the place, is not to be burnt, time is long can form an ugly holes.

So, as long as the first time to burn the full wax pool, you will be able to burn all the beautiful.

Trim the candle wick

Do not think that the wick will turn to ashes as the fire light. Every time you light a candle, you need to trim the candle

wick.The long candle will cause the flame to be too high, and it will also speed up the consumption of the candle,

and it will also smoke black smoke and blacken the candle walls.

Trim the wick until it is 3 to 5 mm before lighting. Somebody’s asking,

why do you want to trim before you want, not after?

Because the candle is solidified before the point, the wick of ash falls into the wax pool or clean up,

if the later trim, not a lot of ash fall into the wax pond, that can be a big trouble! Imagine the picture yourself!
It is recommended to trim one candle every four hours.Use the candle for 4 hours and then extinguish the candle.
Allow the candle to cool naturally, and then use the wick to cut the wick professional tool.

Remember to use a dedicated extinguishing tool.

Now that you’re in a scented candle pit, you have to go with a professional tool. Fire extinguishers,

ignitors and wick trimmers.Don’t blow out the candles with your mouth,

or you’ll smoke and burn. This is where our tools come in!
If you like to watch movies in the 17th and 18th centuries, you will find that there are often candles inside.

When extinguishing the candle, it can prevent black smoke,

and the appearance is beautiful and delicate, and it is placed beside the candle, which is also very beautiful.

Wick trimmers, because they can also be used to put out fires, also called fire shears. Therefore,

it is the ability to trim the candle wick,which can be easily cut into a variety of deep and narrow candle cups.

The taper of the round head can also avoid the black ash of the wick in the wax pool.
Do not use ordinary lighters for light candles, because they are easy to burn,

and when the candle is burned down, the lighter is not enough.So a handy igniter is a must.

Twist the wick when not burning.Every time the candle is burned, the wick of the candle is crooked,

so it is easy to burn the wall of the candle,

so every time it is burnt, twist it with your hand and make sure that it is in the center of the wax pool.